Hiya,
We may decide to use NPAR(network Partitioning) to save on Physical NICs in our VMware environment.
But how would I configure & connect up to my management network during setup. We were going to put the MGMT network on separate NICS, before NPAR was mentioned.
setup:
1.Plug a cable into a 10gb NIC that is partitioned.
2. On the VMware Direct Console try and select Management VLAN, will this work, as I wont have configured traffic separation at this point.
how do you do it!
or would you avoid NPAR for the management network?
cheers Mike